Mantis CNC Build 2011
The Mantis CNC is small, minimal, computer-controlled CNC mill. It's parts cost ~$100. From their demo videos it can cut PCBs and aluminum.
We plan on buying the parts together and collaborating resources for the build. The parts purchase will take place early January 2011. If you are interested please contact Th0mas on his talk page.
There is a video guide to building the Mantis CNC available on the website. While the BOM and AutoCAD drawings are available on the official website, A more complete set of documents are available from a third party who built the Mantis from scratch without the FABLAB kit.
To add to the relatively sparse information available on the official site here are some 3rd party links to people's Mantis builds.
Mantis built from scratch without official support - lots of added detail we need on this page like dimensioned drawings, completed BOM. Note that his build log is split over a few separate blog posts, the links are in the main column after the end of the blog post.
BOM / Part Sourcing
While the majority of the BOM has suggested part numbers and sources, we will try to source most of the parts locally.
Some local stores for parts:
It is my hope that one of the builders has access to a suitable saw, a drill press, and enough space to accommodate the wood cutting. Another option would be to find someone with a large enough CNC and pay them to cut the wood for us. Any suggestions / comments?
The Toronto group is also making one. Darcy Whyte is making one with the Toronto group. .