Laser Cutting Resources
This page is an index to various internal and external laser cutting resources.
WiFi Network in M76 Lab
You can connect your laptop directly to the Epilog Laser Cutter. Use the WiFI access point Art Engine M76 Lab (WPA-PSK key c1rcu1tM76). Alternatively, you can connect using the grey Ethernet cable.
The laser cutter is at IP address 192.168.1.2 (reserved).
The Epilog printer driver can be downloaded from https://www.epiloglaser.com/tech-support/zing-drivers.htm
Using the Epilog Zing
- PCB Etching