Difference between revisions of "Epilog Settings"

From Mod Lab
Jump to: navigation, search
Line 3: Line 3:
 
If your material is not listed here, see the [https://www.epiloglaser.com/assets/downloads/whitepapers/settings_whitepaper.pdf Epilog Settings Whitepaper] for advice on how to identify the proper settings.
 
If your material is not listed here, see the [https://www.epiloglaser.com/assets/downloads/whitepapers/settings_whitepaper.pdf Epilog Settings Whitepaper] for advice on how to identify the proper settings.
  
(Awaiting table support for proper formatting)
+
{| class="wikitable" style="text-align: center;"
+
!width=80|Material
Material | Color | Thickness | Job | DPI | Power | Speed | Frequency | Notes
+
!width=80|Color
 
+
!width=80|Thickness
Acrylic | Clear | 3mm | Cutting | - | 100% | 45% | 5000Hz |
+
!width=80|Job
 
+
!width=80|Power
" | " | - | Etching | 500 | 50% | 50% | - | Use "Stucki" rasterization
+
!width=80|Speed
 +
!width=80|Frequency/DPI
 +
!Notes
 +
|-
 +
| rowspan=2|Acrylic   || rowspan=2| Clear || 3mm || Cutting || 100% || 45% || 5000Hz ||
 +
|-
 +
|                                           n/a || Etching || 50% || 50% ||500 DPI ||Use "Stucki" rasterization
 +
|-
 +
| rowspan=2|Cardboard || rowspan=2| n/a  || Corrugated, single-layer || Cutting || % || % || Hz ||
 +
|-
 +
|                                            Corrugated, double-layer || Cutting || % || % || Hz ||
 +
|}

Revision as of 10:23, 12 November 2014

Settings for ModLab's Epilog Zing laser cutter, for various materials and thicknesses.

If your material is not listed here, see the Epilog Settings Whitepaper for advice on how to identify the proper settings.

Material Color Thickness Job Power Speed Frequency/DPI Notes
Acrylic Clear 3mm Cutting 100% 45% 5000Hz
n/a Etching 50% 50% 500 DPI Use "Stucki" rasterization
Cardboard n/a Corrugated, single-layer Cutting  %  % Hz
Corrugated, double-layer Cutting  %  % Hz