Difference between revisions of "Epilog Settings"

From Mod Lab
Jump to: navigation, search
(Created page with "Settings for ModLab's Epilog Zing laser cutter, for various materials and thicknesses. If your material is not listed here, see the [https://www.epiloglaser.com/assets/downlo...")
 
 
(4 intermediate revisions by one user not shown)
Line 3: Line 3:
 
If your material is not listed here, see the [https://www.epiloglaser.com/assets/downloads/whitepapers/settings_whitepaper.pdf Epilog Settings Whitepaper] for advice on how to identify the proper settings.
 
If your material is not listed here, see the [https://www.epiloglaser.com/assets/downloads/whitepapers/settings_whitepaper.pdf Epilog Settings Whitepaper] for advice on how to identify the proper settings.
  
(awaiting table support for proper formatting)
+
{| class="wikitable" style="text-align: center;"
Material | Color | Thickness | Job | DPI | Power | Speed | Frequency | Notes
+
!width=80|Material
 
+
!width=80|Color
Acrylic | Clear | 3mm | Cutting | - | 100% | 45% | 5000Hz |
+
!width=80|Thickness
 
+
!width=80|Job
" | " | - | Etching | 500 | 50% | 50% | - | Use "Stucki" rasterization
+
!width=80|Power
 +
!width=80|Speed
 +
!width=80|Frequency/DPI
 +
!Notes
 +
|-
 +
| rowspan=2|Acrylic   || rowspan=2| Clear || 3mm || Cutting || 100% || 35% || 5000Hz || style="text-align: left;"|Keep protective film on underside to protect surface from laser bed.
 +
|-
 +
|                                            n/a || Etching || 50% || 50% ||500 DPI || style="text-align: left;"|Use "Stucki" rasterization
 +
|-
 +
| rowspan=3|Cardboard || rowspan=3| n/a  || Corrugated, single-layer || Cutting || % || % || Hz || style="text-align: left;"|
 +
|-
 +
|                                            Corrugated, double-layer || Cutting || % || % || Hz || style="text-align: left;"|
 +
|-
 +
|                                            n/a                      || Etching || % || % || DPI || style="text-align: left;"|
 +
|-
 +
| rowspan=2|Hardboard || rowspan=2| n/a  || 1/8" || Cutting || % || % || Hz || style="text-align: left;"|
 +
|-
 +
|                                            n/a  || Etching || % || % || DPI || style="text-align: left;"|
 +
|}

Latest revision as of 19:30, 18 March 2015

Settings for ModLab's Epilog Zing laser cutter, for various materials and thicknesses.

If your material is not listed here, see the Epilog Settings Whitepaper for advice on how to identify the proper settings.

Material Color Thickness Job Power Speed Frequency/DPI Notes
Acrylic Clear 3mm Cutting 100% 35% 5000Hz Keep protective film on underside to protect surface from laser bed.
n/a Etching 50% 50% 500 DPI Use "Stucki" rasterization
Cardboard n/a Corrugated, single-layer Cutting  %  % Hz
Corrugated, double-layer Cutting  %  % Hz
n/a Etching  %  % DPI
Hardboard n/a 1/8" Cutting  %  % Hz
n/a Etching  %  % DPI