Difference between revisions of "Epilog Settings"

From Mod Lab
Jump to: navigation, search
(Created page with "Settings for ModLab's Epilog Zing laser cutter, for various materials and thicknesses. If your material is not listed here, see the [https://www.epiloglaser.com/assets/downlo...")
 
Line 3: Line 3:
 
If your material is not listed here, see the [https://www.epiloglaser.com/assets/downloads/whitepapers/settings_whitepaper.pdf Epilog Settings Whitepaper] for advice on how to identify the proper settings.
 
If your material is not listed here, see the [https://www.epiloglaser.com/assets/downloads/whitepapers/settings_whitepaper.pdf Epilog Settings Whitepaper] for advice on how to identify the proper settings.
  
(awaiting table support for proper formatting)  
+
(Awaiting table support for proper formatting)
 +
 
Material | Color | Thickness | Job | DPI | Power | Speed | Frequency | Notes
 
Material | Color | Thickness | Job | DPI | Power | Speed | Frequency | Notes
  

Revision as of 11:04, 12 November 2014

Settings for ModLab's Epilog Zing laser cutter, for various materials and thicknesses.

If your material is not listed here, see the Epilog Settings Whitepaper for advice on how to identify the proper settings.

(Awaiting table support for proper formatting)

Material | Color | Thickness | Job | DPI | Power | Speed | Frequency | Notes

Acrylic | Clear | 3mm | Cutting | - | 100% | 45% | 5000Hz |

" | " | - | Etching | 500 | 50% | 50% | - | Use "Stucki" rasterization